About hot water in Meridan Plains
Meridan Plains lies west of Little Mountain, with newer estate homes mixed in with larger blocks.
If your Meridan Plains home was built in the last 15 years or so, it may have come with a builder-installed heat pump, solar or gas continuous flow system. Once these pass their warranty period, faults like error codes, noisy fans and lukewarm water become more common. Many of these faults can be repaired, so it's worth having the system tested before you replace it.
Hot water services in Meridan Plains
We handle hot water replacement, repairs, urgent call-outs and servicing in Meridan Plains, with a fixed price before any work starts.
- Hot water replacementLike-for-like changeovers, often the same day, or an upgrade to heat pump, solar or gas. Old unit removed and compliance lodged.
- Hot water repairsNo hot water, lukewarm water, a dripping relief valve or an error code. Diagnosed on site and fixed at a price agreed first.
- Emergency hot waterNo hot water or a tank leaking now. Fast response, with same-day replacement on most systems.
- Servicing and maintenanceInspections, valve and anode checks, and maintenance that helps your system last longer.
Systems to consider: Replacing a builder-installed heat pump like for like keeps the existing plumbing and power connections, which keeps the job quick and the cost down. Compare heat pump hot water, solar hot water, continuous flow and instantaneous, or read which system suits a Sunshine Coast home.
Common hot water problems and what they mean
Every property is different, but these faults are common in newer homes, depending on the system's age, where it's installed and the water supply.
- Heat pump showing an error codeCommon on builder-installed heat pumps coming out of warranty. Many are repairable.
- Lukewarm showersA failing tempering valve or a heat pump running on reduced capacity is the usual cause.
- Solar booster running all the timeA faulty controller or timer setting can push up power bills.
No hot water in Meridan Plains right now?
Check these first. They can save you a call-out.
Electric system?
Check the hot water circuit or safety switch at the switchboard hasn't tripped. If it trips again, leave it off.
Gas system?
Check the gas is on at the meter, or that the LPG bottle isn't empty.
Leaking or burst?
Turn off the cold water valve going into the unit, then turn off its power or gas.
Hot water questions from Meridan Plains
Do you service Meridan Plains, and is there a call-out fee?
Yes. We cover Meridan Plains 4551, along with neighbouring Little Mountain, Palmview and Caloundra West. There's no call-out fee and no travel surcharge, and you get a fixed price before any work starts. Call 0422 698 311 to check our next available time.
What size hot water system does a typical Meridan Plains home need?
Households in Meridan Plains average 2.6 people (2021 Census). As a rough guide, a family of three or four usually needs about a 250 litre electric or heat pump tank, or a continuous flow unit of around 20 to 26 litres a minute. Off-peak electric tanks need to be bigger, because they heat only once or twice a day. We confirm the right size when we quote.
Which type of hot water system works best in Meridan Plains?
Meridan Plains households average 2.6 people (2021 Census), which is the starting point for sizing. Replacing a builder-installed heat pump like for like keeps the existing plumbing and power connections, which keeps the job quick and the cost down. Eligible heat pump and solar models also attract STC incentives that reduce the upfront price.
Why does our hot water run out so quickly in Meridan Plains?
At the 2021 Census, households in Meridan Plains averaged 2.6 people, so running out of hot water is a common complaint. Usually the tank is too small for the household, the element or thermostat has failed so only part of the tank heats, or a continuous flow unit is too small for two showers at once. We test which it is before recommending a fix or a bigger system.
How much does a new hot water system cost in Meridan Plains?
New hot water systems in Meridan Plains start from $1,700 supply and install. The price depends mainly on the system you choose. For Meridan Plains homes we also allow for whether it's a like-for-like swap or a change of system type. You get a fixed price before any work starts, with no call-out fee and no travel surcharge, and every install has our lifetime workmanship warranty. With Meridan Plains households averaging 2.6 people (2021 Census), the size you need is the biggest factor in the price.
Figures in these answers are from the 2021 Census, via GDP suburb profile, In The Suburbs. Sizes are a rough guide; we confirm the right system when we quote.
Recent hot water installs on the Sunshine Coast
