About hot water in Tanawha
Tanawha is a rural locality in the Sunshine Coast hinterland, immediately south of Mons and south-west of Buderim, covering about 12.8 square kilometres. It had 1,312 residents at the 2021 Census. Homes here are large: about 38% have four bedrooms and about a third have five or more. Homes this size usually need a bigger storage tank, a large heat pump or a high-flow continuous flow unit.
Sources: Wikipedia, Queensland Places (UQ), GDP suburb profile (ABS data). Population figures are from the 2021 Census. The hot water advice on this page is general and applies differently to every property.
On acreage, it's common to have tank or bore water, LPG, and a long pipe run between the hot water system and the house. A long run means a longer wait at the tap, so placement is worth thinking about when a system is replaced, and sheds or granny flats sometimes need their own small system.
Hot water services in Tanawha
We handle hot water replacement, repairs, urgent call-outs and servicing in Tanawha, with a fixed price before any work starts.
- Hot water replacementLike-for-like changeovers, often the same day, or an upgrade to heat pump, solar or gas. Old unit removed and compliance lodged.
- Hot water repairsNo hot water, lukewarm water, a dripping relief valve or an error code. Diagnosed on site and fixed at a price agreed first.
- Emergency hot waterNo hot water or a tank leaking now. Fast response, with same-day replacement on most systems.
- Servicing and maintenanceInspections, valve and anode checks, and maintenance that helps your system last longer.
Systems to consider: Rural roofs and yards suit solar and heat pumps well, and listed models attract STC incentives. LPG continuous flow is a good option where the house already has gas. Compare solar hot water, heat pump hot water, gas hot water, or read which system suits a Sunshine Coast home.
Common hot water problems and what they mean
Every property is different, but these faults are common in acreage properties, depending on the system's age, where it's installed and the water supply.
- Long wait for hot water at the tapThe system is far from the bathroom. Relocating it or adding a second unit fixes it.
- LPG running out or pilot going outCommon on rural gas systems. Many owners switch to a heat pump instead.
- Discoloured hot water on tank or bore supplyUsually a worn anode or sediment build-up.
No hot water in Tanawha right now?
Check these first. They can save you a call-out.
Electric system?
Check the hot water circuit or safety switch at the switchboard hasn't tripped. If it trips again, leave it off.
Gas system?
Check the gas is on at the meter, or that the LPG bottle isn't empty.
Leaking or burst?
Turn off the cold water valve going into the unit, then turn off its power or gas.
Hot water questions from Tanawha
Do you service Tanawha, and is there a call-out fee?
Yes. We cover Tanawha 4556, along with neighbouring Sippy Downs, Mons and Forest Glen. There's no call-out fee and no travel surcharge, and you get a fixed price before any work starts. Call 0422 698 311 to check our next available time.
What size hot water system does a typical Tanawha home need?
Tanawha has a lot of larger homes: about 72% have four or more bedrooms (2021 Census). As a rough guide, a busy household in a four or five bedroom home usually needs a 315 litre or larger electric or heat pump tank, or a gas continuous flow unit of around 26 litres a minute or more if two showers run at once. Off-peak electric tanks need to be bigger, because they heat only once or twice a day. We confirm the right size when we quote.
Which type of hot water system works best in Tanawha?
If your property in Tanawha runs on tank water, have the anode checked more often, and where there's no mains gas, gas systems run on LPG. For the larger homes common in Tanawha, a big heat pump or a high-flow gas continuous flow unit keeps up with several bathrooms. Rural roofs and yards suit solar and heat pumps well, and listed models attract STC incentives. LPG continuous flow is a good option where the house already has gas.
What should I know about hot water in Tanawha?
Tanawha is a rural locality in the Sunshine Coast hinterland, immediately south of Mons and south-west of Buderim, covering about 12.8 square kilometres. On acreage, it's common to have tank or bore water, LPG, and a long pipe run between the hot water system and the house. A long run means a longer wait at the tap, so placement is worth thinking about when a system is replaced, and sheds or granny flats sometimes need their own small system.
How much does a new hot water system cost in Tanawha?
New hot water systems in Tanawha start from $1,700 supply and install. The price depends mainly on the system you choose. For Tanawha homes we also allow for the bigger tank or higher-flow unit that larger homes need and longer pipe runs and access on acreage. You get a fixed price before any work starts, with no call-out fee and no travel surcharge, and every install has our lifetime workmanship warranty. With about 72% of Tanawha homes having four or more bedrooms (2021 Census), many need a larger system, which costs more than a standard 250 litre tank.
Figures in these answers are from the 2021 Census, via GDP suburb profile. Sizes are a rough guide; we confirm the right system when we quote.
Recent hot water installs on the Sunshine Coast
